des-inv
CNC Mill 1 — Part A Drawing CNC Mill 1 — Part A Drawing
Part drawing for CNC Mill 1 upgrade, Part A. Material: HDPE. TEAMLab standard tolerances.
Part Drawing
Dimensions
| Feature | Value |
|---|---|
| Overall length (X) | 6.00” |
| Overall width (Y) | 4.00” |
| Material | HDPE |
| Scale | 1:1 |
| Sheet | 1 of 1 |
Key geometry:
- 12× Ø.25” through holes (bolt hole pattern), depth 0.125”
- R1.00 bolt hole circle radius, centered at (1.50, 2.50)
- Circular pocket R.75, depth 0.125” (internal pocket)
- Rectangular profile: corner at (3.75, 1.75), size 1.50 × 1.25”, R.30 corners
- Upper-left diagonal mill cut
- Lower-left arc R.50
Notes:
- Cut internal profile only 0.125” deep
- Cut internal pocket only 0.125” deep
Title Block
| Field | Value |
|---|---|
| Title | CNC 1 Part A |
| Material | HDPE |
| Scale | 1:1 |
| Tolerances | Fractional ±.025 · 2-place decimal ±.01 · 3-place decimal ±.005 · Angular ±.1° |
| Organization | TEAMLab |
See Also
- cnc-1 — lab instructions for making this part
- cnc-mill-1b — Part B companion drawing