des-inv
CNC Mill 3 — Part B Drawing CNC Mill 3 — Part B Drawing
Part drawing for CNC Mill 3 upgrade, Part B. Material: Aluminum (~3” × 6” × 1”). TEAMLab standard tolerances. Sheet 2 of 2.
Part Drawing
Drawing shared with CNC Mill 2
Part B for CNC Mill 3 uses the same base geometry drawing as CNC Mill 2 Part A — the part profile is identical; the difference is tooling and machine setup (TMC 7 vs. 2nd OP mill).
Title Block
| Field | Value |
|---|---|
| Title | CNC Mill 2 Part A (shared drawing) |
| Material | Wax (title block) / Aluminum per CNC Mill 3 instructions |
| Scale | 1:1 |
| Size | A |
| Sheet | 2 of 2 |
| Tolerances | Fractional ±.025 · 2-place decimal ±.01 · 3-place decimal ±.005 · Angular ±.1° |
| Organization | TEAMLab |
Program
Program file:
M3-B1.CAM— located on thumb drive in CNC Mill 3 Upgrades folder.
See Also
- cnc-3 — lab instructions for making this part
- cnc-mill-3a — Part A companion drawing
- cnc-mill-2a — identical part drawing (CNC Mill 2 Part A)